Can your skid steer moonlight as a lumberjack? Six attachments that make it possible — no flannel shirt required.
Stop wrestling trees by hand. I’ve been there — one stubborn stump, a sore back, and a cooler full of regrets. A good tree puller turns that fight into a five-minute job.
I’ll walk you through six skid steer tree pullers with push bars that I trust. Short takes, real strengths, and who each one is built for — no fluff, just the tools that get trees out cleanly.
Top Picks
RAParts GreyWolf Heavy-Duty Puller
This GreyWolf stands out for heavy-duty performance — its 3" bore cylinder and 3,500 PSI rating give it muscle for larger posts and thicker trunks. It’s clearly aimed at professionals who need top-end extraction power.
Overview
I rate the RAParts GreyWolf highly when you need a puller that can tackle the largest posts and thicker root systems. It’s built with a wide jaw, a 3" bore cylinder (8" stroke), and a maximum operating pressure around 3,500 PSI — specs more commonly found on pro-grade attachments.
Strengths and technical highlights
Those elements combine for a tool that will pull big posts and small trees that simpler units can’t. The included couplers and hoses are a convenience, but I advise checking compatibility with your carrier and ensuring proper hydraulic flow and relief settings.
Who should consider it and practical tips
This is my pick for commercial users, fence contractors, and land managers who routinely face larger removals. The higher upfront cost is justified if you need the extra capacity and durability. Keep in mind shipping and handling for a 400+ lb attachment, and verify mounting plate fit — aftermarket units sometimes need minor adjustments.
Titan TTP13 Push-Bar Tree Puller
I found this model to be a workhorse for demanding removal jobs — the push bar adds real leverage and control. It pairs heavy clamping force with rugged construction for reliable, repeatable pulls.
Overview
I like this Titan with push bar because it combines raw pulling power with a practical leverage feature that makes stubborn posts and small trees come out cleaner. It’s built around a 2" bore, 10" stroke hydraulic cylinder rated at 3,000 PSI, and the push bar is a real difference-maker when you need to force roots loose without excessive machine repositioning.
Key features and what they mean
These specs translate to consistent clamp pressure, a strong bite on trunks and posts, and less digging or chopping. The push bar helps me nudge a tree or post forward so the jaws can center and clamp more effectively.
Benefits, limitations, and real-world tips
I appreciate how the push bar reduces the need to reposition the skid steer and allows me to work faster on rows of saplings or fence lines. However, it’s a heavy tool (listed weight around mid-300s lbs) so you need a machine with appropriate lift and hydraulic flow. In practice I recommend checking couplers and hose routing — a few owners mentioned swapping fittings to avoid hose snagging.
If you want a durable, high-output tree/puller that gives you extra mechanical advantage, this Titan TTP13 with push bar is one of the most capable options in this roundup.
Titan John Deere-Fit Tree Puller
I like this Titan variant when I need a unit that matches tractor mount standards — it’s designed to fit John Deere equipment and still delivers strong clamping. It handles heavy posts and larger-rooted trees with confidence.
Overview
This Titan model is a good option when you want a puller that’s intentionally matched to tractor mounting patterns — the part number and specs indicate a focus on fit and reliable operation on John Deere machines. It delivers roughly the same clamping power as the other Titan models (about 3,000 PSI equivalent), but with configuration intended for tractor users.
Important features and how they help
Because it’s designed to fit tractors, you get a cleaner install and less adaptation compared with generic units in many cases. The unit’s strength makes it effective on medium-to-large posts, but confirm that your tractor’s 3-point or quick-attach and hydraulic specifications match the attachment’s requirements.
Practical advice and limitations
I recommend this Titan for landowners with John Deere tractors who want a puller optimized for their equipment. It saves time on fence removal and sapling clearing, but it isn’t a lightweight — make sure your tractor has the lift capacity and hydraulic flow before buying. Also check whether additional hose fittings or strain reliefs are needed for your setup.
Titan TTP13 Skid-Steer Tree Puller
This model gives a lot of performance for the price and has a proven track record with heavy use. It’s straightforward to hook up and gets the job done on saplings and smaller posts with minimal fuss.
Overview
I picked this Titan TTP13 because it’s repeatedly recommended for operators who want a capable puller without a premium price tag. The 3,000 PSI hydraulic system with a 2" bore and 10" stroke is the heart of the unit, and the serrated jaw grips trunks and posts securely so you can extract roots and posts faster than digging or cutting.
What stands out
Several users in the field report pulling hundreds of small trees without issue — one user even pulled dozens of 1/2"–4" saplings in a single day. The main real-world caveat I see is alignment: because the grab is slightly off-center, some operators need to stand up or use a camera to make precise grabs.
Practical notes and limitations
I like this unit for contractors and landowners who want reliable performance on a budget. It’s not the fanciest puller, but if you’re doing long sessions of removal work it will save a ton of time versus manual methods. Plan to tweak hydraulic fittings (many owners add 90-degree elbows) and be aware of the bite visibility issue when working alone.
Wolfequip 12" Tree Puller Attachment
I find this Wolfequip ideal for routine landscaping and fence removal where trees are in the 2"–6" range. It’s relatively lightweight and punches above its class with a 2.5" x 8" cylinder and serrated jaws.
Overview
The Wolfequip 12" Tree Puller is a practical workhorse for property maintenance where most removals are small-to-medium trees and wooden posts. I appreciate that it aims to eliminate root digging by pulling the tree and root ball in one motion, which speeds cleanup and reduces stump work.
Notable specs and capabilities
This combination makes it friendly to medium-sized skid loaders and versatile for landscaping, gardening, and farm cleanup. The unit’s swing arm and jaw geometry provide a reliable bite on trunks within the stated range.
Practical takeaways
I’d recommend this to anyone clearing saplings, brush, or replacing fence lines who doesn’t need heavy-duty, large-tree extraction. It’s lighter than many full-size pullers, making transport and mounting easier, but don’t expect it to handle 10"+ trunks. Also check your loader’s mounting compatibility and hydraulic flow to ensure smooth operation.
MIVA Heavy-Duty Tree Pole Puller
This MIVA puller is a cost-conscious option that’s available from US warehouses, which keeps delivery simple. The adjustable hydraulic setup and heavy manganese-steel construction make it a sensible choice for routine landscape and farm tasks.
Overview
I chose the MIVA because being in U.S. warehouses reduces lead time and shipping complexity, which matters when you want to get to work quickly. It’s built from manganese steel and claims a robust hydraulic interface that hooks to most skid steers.
Features I pay attention to
Those features suggest ease of installation and long service life under tough conditions, but the weight is notable — the listing indicates roughly 550 lbs, so you’ll want to confirm your skid steer’s lift rating. Because it’s a newer or less widely reviewed entry, I’d also check warranty and dealer support when buying.
Who this is for and what to expect
If you need a practical, in-stock puller that won’t take months to arrive, this one is attractive. Expect a bit of setup when fitting it to your machine and consider routing hoses carefully to avoid snags. The long-term durability looks promising on paper, but I’d want a few season’s worth of user feedback for full confidence.
Final Thoughts
If I had to pick two clear winners, I’d go with the RAParts GreyWolf Heavy-Duty Puller and the Titan TTP13 Push-Bar Tree Puller. The GreyWolf is my pick for PROS — it brings the highest extraction power with a 3" bore cylinder and a 3,500 PSI rating, so it’s best for large posts, thick trunks, and heavy-rooted trees on commercial jobsites. The Titan TTP13 Push-Bar is my go-to for contractors and landscapers who want repeatable, controlled pulls — the 3,000 PSI capacity plus the push bar delivers excellent leverage and reliable clamping for fence removal, saplings, and frequent use.
Bottom line: choose the GreyWolf when MAXIMUM muscle matters. Choose the Titan TTP13 when you want a workhorse with extra control and repeatability.
FAQ
Most of these pullers like higher pressure — the GreyWolf is rated to 3,500 PSI and the Titan models around 3,000 PSI. I always check my skid steer’s hydraulic specs first. If your machine doesn’t hit the recommended PSI, you’ll still get some pulling power but you’ll lose speed and maximum extraction force.
A push bar gives you leverage and better control over how the puller approaches the tree. I’ll take a push bar any day for repeatable, tidy pulls — especially on bigger roots or when you’re working near fences or structures where control matters.
For saplings and frequent fence jobs I like the Titan TTP13 Skid-Steer Tree Puller or the Wolfequip 12" attachment. They’re lighter, easier to handle, and fast to hook up. They won’t be overkill for 2"–6" trees and make short work of posts.
Yes. If you want a unit that matches your mounting standards and avoids adapter headaches, the Titan John Deere-Fit is the sensible choice. It keeps things simple and still delivers near the same clamping strength as the other Titan models.
Very. Serrated jaws bite and reduce slipping, which matters when you’re pulling ragged roots or wet trunks. Cylinder size and bore determine force — the bigger the bore (and higher the PSI), the more extraction power. I look for both when I need heavy-duty performance.
Maintenance is straightforward: keep the cylinder and hoses clean, grease pivot points, and inspect serrations for wear. I also check for bent frames after tough pulls. Replace hoses at the first sign of cracking and store the unit under cover to avoid rust.
Yes — the MIVA Heavy-Duty Tree Pole Puller is a solid economical pick. It’s adjustable, built from heavy manganese steel, and stocked in the U.S., so you save money without sacrificing basic durability for routine farm and landscape tasks.
Trying to decide between the Titan tractor-fit (John Deere) model and the Titan universal SSQA. I have a John Deere but sometimes I rent different attachments and machines.
What would you pick: dedicated fit for perfect mounting or universal for flexibility? Cost isn’t a huge factor, I just want reliability and fast hookups on rental machines too.
I went universal because I rent loaders sometimes. Saves the headache — just make sure your coupler is properly sized.
If you mostly use your John Deere and want a snug fit, the John Deere-specific Titan makes sense. But since you rent machines occasionally, the universal SSQA buys more flexibility. Either way, performance is similar — choose based on how often you switch equipment.
If you value perfect alignment and have only one machine, the JD-specific fit reduces adapter wear. But for rentals, I’d do universal.
Also consider resale — universal tends to sell easier if you ever decide to upgrade.
Love the look of the RAParts GreyWolf — that 3″ bore and 3,500 PSI rating sounds like it could yank out anything I can’t dig up by hand. I’m a weekend pro and my fence posts have been a nightmare.
Has anyone used the GreyWolf on really knotted roots? I’m wondering if the jaws will slip or if the cylinder power is enough to break them loose cleanly.
Used one last fall on a bunch of maple stumps with gnarly roots. It took a few tries and some soil loosening but it definitely did the job. No slippage on the serrated jaws for me.
Good question — the GreyWolf’s 3″ bore gives it serious pushing/pulling power, and the review highlights it as a pro-level tool. For knotted roots, pairing the puller with a bit of back-and-forth rocking and loosening soil first usually helps. If roots are huge you might still need to cut some first.
If you’re dealing with rootball action, I’d recommend pruning roots first where possible. Otherwise the GreyWolf is solid but it isn’t magic 🙂
Quick install question: For those who’ve used the Titan universal SSQA and the John Deere variant — does the universal feel rock-solid on big pulls or is there any noticeable play in the coupler that makes you nervous?
I’ve had mine on a universal and it’s been tight. I grease the pin points regularly and haven’t had issues. If you feel play, replace worn pins or bushings.
Most users report the universal SSQA is secure for heavy pulls when properly latched. Any perceived play usually comes from worn coupler components rather than the puller itself — inspect and maintain the coupler pins and locking mechanisms.
Haha, if only it came with a ‘please-come-out’ button. 🤣
Seriously though, Wolfequip seems like a lighter option for medium trees. I like that for landscaping jobs where you don’t need the GreyWolf’s brute force.
Exactly — the Wolfequip is noted as great for medium trees and typical landscaping work. It’s lighter and punches above its weight for 2″–6″ trees, per the review.
I snagged the MIVA recently because I wanted something economical that arrives fast (USA stock was a selling point). So far:
– Solid build for the price
– Adjustable hydraulics work well on different trees/posts
– Not as flashy as the GreyWolf, but it handles everyday jobs fine
If you need top-tier extraction every day, go big. For regular farm/landscaping stuff, MIVA is a good middle ground.
Appreciate this, Aisha — did you have to modify hoses or couplers, or was it plug-and-play?
Thanks for the hands-on report — that’s exactly the kind of real-world feedback other readers want. The roundup lists MIVA as a cost-conscious option with US stock, so your experience lines up well.
Yep, handled 4″ saplings with no problem. For bigger rootballs I used a little soil loosening first.
Plug-and-play for the couplers on my machine, just swapped one adapter for a different quick coupler and it was fine. No welding or mods required.
Good to know. Do you find the clamping force sufficient on 4-inch saplings with heavy rootballs?
Okay, confession time: I used the Wolfequip on a stubborn lilac bush and felt like a demolition artist. 😂
But seriously, two quick points:
– If you’re doing fence lines, the Titan push bar model saved me hours.
– If you’re doing smaller landscaping and want to be nimble, Wolfequip or MIVA are the winners.
Also — pro tip: take photos before the pull so you can brag about the ‘before/after’ on social 😂🌳
Thanks! It’s weirdly satisfying to watch a rootball come out clean — like a tiny victory dance 😆
Love the tip and the pic idea — before/after shots are great for planning and for showing clients. The roundup recommends those same splits: Titans for heavy fence work, Wolfequip/MIVA for nimble landscaping.
Haha yep, I keep a ‘victory album’ on my phone for that exact reason. Wolfequip was perfect for my garden beds.
The specs are impressive but man these heavy-duty units look like a pain to transport. My trailer is small and weight/length are real issues. Anyone regretted buying a big puller because it made logistics harder?
Thinking about the Titan with the push bar — the extra leverage sounds great for my long fence lines. A few practical questions:
1) How easy is it to hook up/flip between different skid steers?
2) Anyone worried about the hydraulic PSI affecting smaller machines?
3) Are the push bars worth the added bulk in tight spots?
I run a compact skid steer and occasionally a small tractor, so compatibility is a bit of a concern. Thanks!
The Titan push-bar model is praised for leverage and control in the roundup. For hookup, the universal SSQA is generally quick on/out of couplers; the PSI spec (3,000) means it needs a robust hydraulic system but most mid-to-large compact skids can handle it. Push bars are great for leverage but do add length — measure your transport and worksite clearances before buying.
I run a compact and it worked fine, but I made sure my flow/pressure settings matched the attachment. If your skid is tiny, double-check flow rates — could be slow but still functional.
Short Q: do any of these need a minimum hydraulic flow or are they pretty standard? I’m worried my older skid steer won’t have the flow for 3,000+ PSI cylinders.
I had a sub-2000-era skid with lower flow — the bigger cylinders worked but were sluggish. Switched to a smaller puller for speed. Check your manual for GPM specs.
Good question — PSI and cylinder specs tell part of the story. The attachments list 3,000–3,500 PSI ratings; you should check both your machine’s max pressure and flow (GPM). Higher pressure helps speed and force, but low flow can make operation slow. If your steer is older, confirm GPM and consider a smaller cylinder model like Wolfequip or MIVA for better compatibility.