Which 60-inch bucket will save you time, your back, and maybe your lunch break?
I’ve broken more than one sweat moving dirt with the wrong bucket. It’s loud, slow, and somehow contagious—your whole crew mutters about one more load.
I tried six popular 60-inch buckets so you don’t have to. Short version: some are built like tanks, some keep a clean profile, and one will wrestle roots for you. Pick what matches the HARD jobs you do, not what looks shiny online.
Top Picks
Titan 60-inch 3/16" Thick Dirt Bucket
I consider this a robust choice for landscaping and heavier loader work thanks to its 3/16" structural steel and reinforced gussets. It’s built to withstand frequent use moving dirt, rocks, and debris while still fitting common quick-attach systems.
Overview
This 60" Titan dirt bucket is one I reach for when I need a dependable workhorse that can handle more demanding tasks than a light economy bucket. The thicker 3/16" structural steel and reinforced gussets make it suitable for regular landscaping, material moving, and some light prying.
Features that matter
I like that this bucket is a practical step up from entry-level attachments: you get meaningful durability gains without the cost and weight of full commercial heavy-duty buckets. It’s a good match for landscaping contractors and farm users who frequently move material but aren’t doing rock excavation every day.
Use cases and cautions
Mytee 60-inch Low Profile Reinforced Bucket
I like the combination of low profile, reinforced cutting edge, and powder-coated finish—this is a well-balanced bucket for users who want durability and a tidy look. It’s a practical choice for heavier routine work while still offering good machine visibility.
Overview
This Mytee 60" low-profile bucket is one I’d pick when I need a durable, clean-looking bucket that still offers user-friendly visibility. The thicker sidewall and robust cutting edge make it a dependable choice for repeated handling of soil, gravel, and snow.
Key attributes
I appreciate the low profile when grading and when visibility from the cab matters; it lets you get closer to the ground and judge loads more accurately. The reinforced cutting edge and overall build quality mean it stands up well to typical landscaping and site-prep tasks.
Best use and considerations
Titan Reinforced 60-inch Skid Steer Bucket
I found this to be a well-built economy bucket that balances durability and price. It’s ideal for scooping and spreading loose materials but isn’t intended for heavy ground-breaking work.
Overview
I like this bucket because it hits a sweet spot for homeowners and small contractors who need a durable attachment without paying heavy-duty prices. The reinforced sidewalls and welded-on cutting edge give real confidence for everyday material handling like moving dirt, mulch, and snow.
Key features and who it’s for
I recommend this to anyone who needs a reliable utility bucket for light-to-medium tasks: grading, loading, and moving loose material. I would avoid it for prying rocks or digging compact clay — the manufacturer explicitly recommends heavier 5mm buckets for that work.
Practical insights and limitations
SWICT 60-inch Tooth Bucket for Skid Steer
I find tooth buckets helpful when you need bite into compacted material without a full excavation setup. This light-duty tooth bucket is a good economical option for tractors and small skid steers, as long as you avoid heavy, continuous prying.
Overview
This 60" tooth bucket from the SWICT line gives you extra bite compared with a smooth bucket, which I’ve found useful for breaking up compacted material and making scooping easier. It’s made for smaller skid steers and tractors and is positioned as an economy option.
Main features
I recommend this for light digging tasks where you need improved penetration — think frozen ground, compacted topsoil, or situations where teeth help start a load. If your work regularly involves rocky excavation or heavy prying, choose a heavier-duty, thicker-steel tooth bucket instead.
Tips and limitations
SWICT 60-inch Smooth Low Profile Bucket
I view this as a budget-friendly, handcrafted option suited to tractors and smaller skid steers. It’s excellent for material handling and light snow work but not built for continuous heavy duty digging.
Overview
This 60" smooth, low-profile bucket is an economical choice I’d pick for tractors and small skid steer loaders. It’s built to be lightweight, easy to handle, and to give you good visibility when loading or grading.
Notable features
I recommend this bucket for homeowners and light-duty contractors who need reliable material-handling without unnecessary weight. If you run a heavy skid steer constantly digging or prying rocks, I’d advise looking at heavier plate options.
Practical use and tips
Titan 60-inch Root Grapple Skid Steer Bucket
I appreciate the grapple’s ability to grab and secure brush, logs, and rocks for clearing and stacking. That said, mixed reports on hydraulic and hinge longevity mean I’d inspect fittings closely and be prepared for maintenance.
Overview
This 60" root grapple is built to tackle brush, logs, rock picking, and landscape clean-up where a standard bucket can’t hold irregular loads. The serrated edge and twin cylinders deliver a firm bite and allow me to rake and stack material efficiently.
What stands out
I find it extremely useful for clearing fence rows, gathering storm debris, and moving irregular materials you don’t want spilling out of a plain bucket. However, the user feedback I’ve seen shows mixed experience around hydraulic couplers, cylinder longevity, and hinge pin retention — so I’d recommend careful inspection on delivery and keeping spare hydraulic fittings and pins on hand.
Practical advice
Final Thoughts
If I had to pick one go-to, it’s the Titan 60-inch 3/16" Thick Dirt Bucket. It’s the most rugged option here and handles heavy landscaping, dirt/small rock work, and frequent scooping without showing weak spots. I recommend this for landscapers, rental fleets, and anyone who leans into tough, daily loader work.
If you want a close second for jobs where visibility, a tidy finish, and reinforced cutting edges matter—especially around properties and houses—go with the Mytee 60-inch Low Profile Reinforced Bucket. It’s slightly more refined in fit-and-finish and still tough enough for routine heavy work.
How I Choose the Right 60-Inch Bucket (and what I check before buying)
I break the decision into three practical questions: what job are you doing most, how rugged does the bucket need to be, and will it fit your machine? That framework keeps me from overbuying or under-preparing.
Match the bucket to the task
Cut edge, teeth, and reinforcement
Buckets come with smooth edges or teeth. Teeth give bite for compacted ground; smooth edges spread and grade material better. Reinforcements—gussets, wear strips, and thicker cutting edges—matter when you’re doing repeated, abrasive work. I favor reinforced cutting edges for daily landscaping; they delay expensive repairs.
Fit, capacity, and machine safety
Always confirm three things:
Maintenance and small mods that pay off
I do a quick prep on every new bucket: grease pivot points, torque fasteners, and check the cutting edge. Two inexpensive upgrades I recommend: add a bolt-on wear edge for cheap replacement and keep a spare set of cutting-edge bolts. For grapples, inspect hydraulic hoses and pivot pins weekly during peak use.
Quick comparison (at-a-glance)
| Type | Best Use | Trade-off |
|---|---|---|
| Titan 3/16" Dirt Bucket | Heavy landscaping, frequent scooping | Heavier; may reduce lift marginally |
| Mytee Low Profile Reinforced | Clean finish, better visibility, heavy routine work | Slightly more specialized fit-and-finish |
| Titan Reinforced (budget) | Everyday loose material handling | Not for heavy ground-breaking |
| SWICT Tooth Bucket | Penetrating compacted ground | Avoid heavy prying; lighter duty |
| SWICT Smooth Low Profile | Light-duty material handling, snow | Not for continuous heavy digging |
| Titan Root Grapple | Brush, logs, irregular debris | More maintenance on hydraulics/hinges |
When you buy, I always double-check compatibility and think ahead to wear items. A smart choice up front saves you time and money in repairs and downtime. If you want, tell me what machine you have and the typical work you do—I'll help you narrow it down further.
FAQs
Maybe — fit comes down to your machine’s quick-attach coupler type, pin spacing, and lift capacity. Don’t guess: check your skid steer manual for the coupler standard (e.g., universal quick attach or manufacturer-specific) and make sure the bucket’s weight and rated payload won’t exceed the machine’s limits.
Teeth help penetrate compacted or rocky ground (think the SWICT tooth bucket). Smooth edges are better for grading, loading loose material, and snow work (see the SWICT smooth low profile). If you split time between both, consider a bolt-on tooth adapter or a bucket designed for occasional tooth use.
For regular, often-heavy landscaping I look for at least 3/16" structural steel—exactly what the Titan 60-inch dirt bucket uses. Thicker steel and reinforced gussets reduce flex and extend life when you’re pushing against roots or small rocks.
Yes, if you clear brush, logs, or irregular debris regularly. The Titan 60-inch Root Grapple grips and secures materials for stacking and hauling. Just be ready to inspect hydraulic fittings and hinges regularly—those areas can need maintenance sooner than a plain bucket.
Inspect welds, the cutting edge, pin bores, and the quick-attach plates. Check for bent lips or misaligned mounts. Tighten any loose hardware and grease pivot points before first use. If the bucket has a powder coat, minor scuffs are normal; structural defects are not.
Root grapple: sounds like a grabby monster for my brush pile 😂
But the note about hydraulic and hinge longevity worries me. Does anyone have tips for preventative maintenance so I don’t end up with a floppy grapple?
Good question — greasing pivot points frequently and checking hydraulic fittings for leaks helps. Also inspect the cylinder mounts for play and torque bolts to spec after 50-100 hours.
Funny image, Tom. Also, don’t use it as a pry bar — that’s how hinges get messed up quickly.
Right — use the grapple for grabs and lifts, not heavy prying. If you plan heavy duty work, consider reinforced attachment points.
I had one start to leak at the cylinder seals after a season — replaced seals and added inline filters. It’s been fine since.
Quick question — the Mytee low-profile bucket looks nice, but will it work with my machine’s quick-tach? The article says universal, but I have a 2012 Bobcat. Anyone tried this exact Mytee model?
I run the Mytee on a ’13 Bobcat S650 with no issues, but I did inspect the pin spacing first. Measure twice, buy once!
Most listings for the Mytee low-profile indicate standard skid-steer mounts. For older Bobcats you might need an adapter — double-check the listing dimensions and your machine’s mounting brackets before buying.
Anyone have warranty experience with the Titan root grapple? The article mentions mixed reports on hydraulic/hinge longevity — does Titan cover those issues or is it buyer beware?
Warranty terms vary by seller. Titan typically offers limited warranties, but some users reported needing to go through reseller channels. Keep documentation and inspect on delivery — that helps with claims.
I had a fitting issue and seller replaced the cylinder under warranty, but it took some back-and-forth.
I appreciate the comparison between the Titans and the budget SWICT options.
For me, the Mytee low-profile is tempting because of visibility and the clean powder coat (important when I’m using it around customers). But the Titan dirt bucket looks tougher for rock work.
Decisions, decisions — anyone run both and can comment on switching back and forth?
They’re different use cases: Mytee for cleaner jobs and visibility; Titan dirt bucket when you expect heavier material. Switching is fine if your coupler/mount is compatible.
I swapped between a Mytee and a Titan V2 last season. Mytee for flower bed prep, Titan for moving gravel — both earned their keep.
Mytee low-profile here — visibility is so much better when grading near edges. I also love that it has a clean look for client properties. Not the toughest for prying, but for fine grading and snow it’s perfect 😊
Great to hear — thanks for reporting back. Visibility makes a big difference in trimming and finish work.
Agree. Low profile + good edge = great for finish grading. Just don’t use it for rock moving.
Long-ish rant incoming: bought a SWICT smooth low-profile bucket last fall. It was cheap and great for snow moving, but the paint started chipping fast and I noticed small surface rust spots within weeks. For heavy digging it’s not the bucket — it’s a material handler for light jobs.
If you’re thinking long-term: expect to touch up paint and watch the lip. Also the SSQA mount fit was a tiny bit snug, nothing a hammer wouldn’t fix 😅
I had the same with a different brand — a good primer and a few coats of enamel fixed it for another season.
Use a rust-inhibiting primer and a durable enamel designed for metal — there are several automotive-grade options that hold up well outdoors.
Yeah, I did a quick sand and sprayed it. Looks much better now.
Thanks for the honest feedback. Surface rust and chipping is common on budget buckets if the finish isn’t fully cured during shipping. Touch-ups and undercoating help a lot.
Would you recommend any specific paint? I’m about to buy one and don’t want it to look like a rust bucket by February.
Curious — which of these comes with replaceable cutting edges? I prefer bolt-on edges so I can replace without welding. Anyone know which ones have that feature?
The Titan Attachments models often have bolt-on edges or provisions for them; the Mytee usually has a reinforced cutting edge but check the product listing photos/specs to confirm bolt-on capability.
I’ve added bolt-on edges to both Titan and budget buckets—makes maintenance way easier.
The 5ft tooth bucket sounds like shark teeth for tractors — lol. 🦈 Are those teeth bolt-on replaceable or welded? I prefer replaceable so I can swap them when dull.
Bolted on is common — makes life easier when teeth get chipped on rocks.
Most 5ft tooth buckets have bolt-on teeth for easy replacement, but confirm on the product listing. Photos usually show bolt patterns if present.
I’m on a tight budget and the Titan V2 reinforced budget bucket looks tempting. The article calls it ‘economy’ but ‘well-built’. Anyone have long-term experience on how it holds up versus the higher-rated Titan?
The V2 is a good middle ground — you lose some heavy-duty features but get solid day-to-day performance. For occasional heavy jobs it might wear faster than the higher-rated Titan dirt bucket.
I had mine for three years with light commercial use — occasional weld touchups but overall reliable.
If your work is mostly material handling, V2 will be fine; if you regularly break ground, consider upgrading.
Quick mounting question: the SWICT listings say SSQA mount — will that fit most modern skid steers or do I need to check specifics? Want to avoid returns.
SSQA is a common standard, but there are variations. Verify pin spacing and coupler type with your dealer or the bucket listing. Photos and spec sheets usually list exact measurements.
Measure your machine’s coupler and compare — saved me a return once.
Thanks — I’ll pull out the tape measure before ordering!
Great roundup — I own the Titan Attachments 60″ dirt bucket and can confirm the 3/16″ steel and gussets feel legit. Handles rocks and clay without flexing too much. I mainly use it for landscaping and it’s held up well for two seasons.
Good to hear — thinking of getting the Titan for my small loader. Does it fit common universal quick tach systems without adapters?
Thanks for sharing, Mark — glad it’s worked out for you. Did you ever add a bolt-on cutting edge or leave the factory one?
I put a bolt-on edge on mine after a year — cheap insurance and it saved the lip when I did a couple of rock moves.
I’m leaning toward the SWICT tooth bucket for breaking slightly compacted soil. The article’s point about teeth for penetration is spot on. But I wonder about the weld quality — is it robust enough for occasional hard digs?
For light to occasional use it should be fine, but if you regularly dig compacted ground you’ll want heavier plate and stronger welds — which is where the Titans come in.
Inspect weld seams on arrival. I returned a bucket once for a dodgy weld and the seller sent a replacement quickly.
I used a SWICT tooth bucket for seasonal fence post digs and it did fine. Just don’t treat it like an excavator bucket.
Thinking practical: I move medium-sized rocks frequently. Would you pick the Titan 60″ dirt bucket or the root grapple? The grapple seems handy for logs/brush but for moving a pile of varied-sized rocks? Advice please.
Great tips — thanks everyone. Sounds like a combo would be ideal, but budget says one for now.
Grapple will grab irregular stuff but you’ll be slower. For piles, bucket all day.
If rocks are loose and you need sorting, the root grapple is useful. But for bulk moving and scooping, the dirt bucket (with reinforced edges) is faster and holds more material.
I use a bucket to move the pile, then grapple for stacking and placing larger boulders.
A few practical notes from someone who buys and refurbishes buckets:
1) Check edge thickness and whether it’s bolt-on.
2) Inspect welds on arrival (tap test can reveal thin spots).
3) Add a wear strip under the bucket lip if you plan heavy scraping.
You can save a ton of money by doing small mods — new edge, gusset reinforcement — instead of buying the top-tier model right away.
I usually go 3/8″ AR plate for the strip if you expect abrasion, but 1/4″ can work for light duty.
Do you have a recommended thickness for a wear strip on a 60″ bucket?
Excellent checklist, Robert. The wear strip tip is underrated — extends life significantly.